Looking for an Embedded Linux Engineer with hands-on experience in Linux kernel, device drivers and BSP development. The role involves board bring-up, kernel porting, device driver development, system daemons and working with Yocto/Buildroot on ARM-based platforms.

Requirements:
Strong programming skills in C with Embedded Linux experience
Hands-on exposure to Linux kernel and device driver development
Experience with Device Tree and kernel driver models
Knowledge of I²C, SPI, UART, GPIO, PCIe and USB drivers
Working knowledge of Yocto Project or Buildroot
Experience with U-Boot and Linux kernel porting
Familiarity with ARM-based architectures and reading schematics/datasheets
Experience with Git, GDB, JTAG and serial console debugging
Working knowledge of Python/Bash is an added advantage.

Looking for an Embedded Linux Application Engineer with strong experience in C/C++, Linux user-space application development and multithreaded programming. The role involves developing application features, integrating with kernel drivers and system services, debugging applications, and working closely with BSP and senior application engineers.
Requirements:
Strong hands-on experience in C/C++ and Embedded Linux
Experience developing multithreaded user-space applications and services
Good understanding of Linux processes, threads, IPC mechanisms and system calls
Experience consuming kernel driver interfaces through sysfs, character devices and IOCTLs
Hands-on experience with GDB, core dumps and Linux debugging tools
Working knowledge of Python/Bash
Experience with Git and application-level debugging
Familiarity with ARM-based embedded platforms is an added advantage.

Looking for a Senior Embedded Linux Engineer with strong experience in BSP development, Linux kernel, device drivers and ARM-based platforms. The role involves end-to-end board bring-up, driver development, Linux build systems, system optimization and kernel-level debugging.
Requirements:
Strong hands-on experience in C/C++ and Embedded Linux
Experience with U-Boot, Linux kernel porting and Device Tree
Strong understanding of Linux kernel internals and subsystem architecture
Experience developing device drivers for PCIe, USB and custom hardware interfaces
Strong expertise in Yocto/BitBake and Linux BSP development; Buildroot experience is an advantage
Experience with ARM 32/64-bit architectures
Hands-on experience with GDB, JTAG, Ftrace and serial console debugging
Experience in boot-time, memory and CPU optimization
Knowledge of secure boot and chain-of-trust is an added advantage
Good Python/Bash scripting skills for build automation.

Looking for a Senior Embedded Linux Application Engineer with strong experience in C/C++, Embedded Linux, application architecture, IPC and multithreaded systems. The role involves designing user-space applications, working with BSP teams, performance optimization, system-level debugging and mentoring engineers.

Requirements:

Strong hands-on experience in C/C++ and Embedded Linux
Good understanding of Linux processes, threads and IPC (D-Bus, sockets, shared memory)
Experience with kernel driver interfaces and BSP integration
Proficiency in Git, GDB, strace, perf and Ftrace
Experience in debugging and optimizing multithreaded/multi-process systems
Python/Bash scripting skills
Familiarity with ARM-based embedded platforms is an added advantage.

Looking for an experienced FPGA Engineer with hands-on expertise in FPGA design, RTL development, verification, implementation, timing closure, and hardware debugging. The role involves end-to-end FPGA development from architecture and RTL coding through verification, implementation, hardware bring-up, and system integration.

Requirements

Strong hands-on experience in VHDL and/or Verilog and production-quality RTL development.
Experience with Xilinx and/or Intel/Altera FPGA platforms and tools such as Vivado and/or Quartus Prime.
Experience in FPGA synthesis, place-and-route, timing analysis, constraints, and timing closure.
Strong understanding of multi-clock domain design, CDC, synchronizers, and asynchronous FIFOs.
Experience with simulation and verification using ModelSim, QuestaSim or equivalent tools.
Practical experience with high-speed interfaces such as PCIe, USB, Ethernet, Aurora and AMBA-AXI/AXI4-Stream.
Experience with DDR/memory interfaces and peripheral interfaces such as UART, I²C and SPI.
Experience in FPGA hardware debugging using Vivado Hardware Manager, ChipScope, Signal Tap, logic analyzers and oscilloscopes.
Hands-on experience with at least one complete FPGA product/platform lifecycle, from RTL development through implementation and hardware bring-up.
Knowledge of DSP implementation on FPGA, including FIR/IIR filters, FFT/IFFT and fixed-point arithmetic, will be an added advantage.
Exposure to PCIe Gen5/Gen6, CXL, 200G/400G Ethernet, JESD204B/C, Versal AI Core, UltraScale+, Agilex or FPGA-based AI/ML acceleration will be an added advantage.

PCB Design Engineer

Looking for a PCB design professional with experience in high-speed, multi-layer board development for advanced electronic systems. The role involves PCB design, layout, signal/power integrity, and collaboration with hardware teams to deliver reliable and manufacturable designs.

Requirements

Experience in multi-layer PCB design (up to 22 layers), including high-speed and complex board layouts.
Strong understanding of schematic capture, PCB layout, routing, and simulation.
Hands-on experience with PADS, OrCAD, Allegro, or Mentor Graphics.
Knowledge of SI/PI, high-speed interfaces such as PCIe and USB, and RF design practices.
Experience with HDI, via structures, stack-up, plane splitting, impedance control, and power distribution networks.
Understanding of PCB fabrication, assembly, SMT components, and design-for-manufacturing.
Strong collaboration, problem-solving, execution, and accountability skills.

Looking for a hardware engineering professional with strong expertise in high-speed digital design to lead board and system development for data center, networking, and high-performance computing applications. The role involves technical ownership, system-level design, debugging, and collaboration across engineering teams.

Requirements

Strong experience in high-speed digital hardware design, including PCIe, Ethernet, and SerDes-based systems.
Hands-on understanding of Signal Integrity (SI), Power Integrity (PI), transmission lines, and impedance-controlled PCB design.
Experience with board architecture, schematic/PCB reviews, board bring-up, debugging, and validation.
Working knowledge of Cadence Allegro/OrCAD, HyperLynx, and ADS.
Exposure to FPGA/ASIC-based board design and power distribution networks.
4+ years of relevant experience, including experience leading board-level development.
Strong analytical, leadership, mentoring, and cross-functional collaboration skills.

Looking for an electronics professional with hands-on exposure to analog and power management design to support customer engagement, technical solutions, and business development activities. The role combines engineering expertise with customer-facing technical support and product promotion.

Requirements
Practical understanding of analog and power management design.
Exposure to power electronics design is desirable.
Strong troubleshooting, communication, and presentation abilities.
Comfortable managing tasks independently while contributing effectively within a team.
3+ years of relevant experience in the electronics industry.
Open to international travel as required.

Looking for an electronics professional with hands-on exposure to FPGA and digital design to support customer engagement, technical solutions, and business development activities. The role combines engineering knowledge with customer-facing technical support and product promotion.

Requirements
– Practical understanding of FPGA architecture, digital design, and HDL-based development.
– Exposure to FPGA hardware development/design is desirable.
– Strong communication and presentation abilities, with confidence in customer interactions.
– Comfortable managing tasks independently while contributing effectively within a team.
– Open to international travel as required.

Our client is looking for a Senior ECAD Engineer with strong experience in complex, high-speed and mixed-signal PCB design.

Key Responsibilities
Design 8–18 layer complex PCBs covering analog, digital, power and mixed-signal designs.
Execute high-speed routing for DDR, PCIe, Gigabit Ethernet, CAN and similar interfaces.
Implement controlled impedance, Signal Integrity, crosstalk and EMI/EMC practices.
Support PCB stack-up, DFM/DFT/DFA and manufacturing optimization.
Create and maintain schematic symbols, footprints and component libraries.
Review manufacturing outputs and resolve fabrication/assembly issues.
Provide technical guidance to junior engineers.
Key Skills
Cadence Allegro PCB Designer, Concept HDL and OrCAD Capture
BGA and complex multilayer PCB design
Signal/Power Integrity and controlled impedance
Cadence Sigrity, Altair PollEx and CAM350
PCB fabrication, assembly and IPC standards
Strong understanding of DFM/DFT/DFA